General Description
The K6P powering module is at the heart of Sennheiser’s professional modular condenser microphone system. It is similar to the K6 powering module but is powered by 12 - 48 V phantom power only, for use where battery power is not required (e.g. permanent installations). The K6P can be combined with various microphone heads to produce microphones with a variety of pick-up patterns. Matt black, anodised, scratch-resistant finish.
Features
	Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
	On/off switch
	High output, low noise
	Transformerless balanced output on 3-pin XLR connector
Delivery Includes
	1 K6P powering module
	1 MZQ 200 microphone clamp
	1 protective carrying case

Technical Data

Frequency response

Profile

Powering module for phantom powering with switch-able roll-off filter suitable for ME 62 - ME 67 microphone heads and -60 versions of MKE microphones, transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V, supply current 2.2 mA, dimensions in mm: Ø 22 x 118, resultant length 52 mm, weight approx. 30 g.

Glossary

Glossary
 

Recommended Accessories
	Description	Product	Article No.
	Shock mount	MZS 6	03287
	Shock mount with 3/8”, 5/8”, and 1/2” interchangeable thread for the K6/K6P powering modules.
	Camera adapter	MZQ 6	03288
	Microphone clamp with integral flashmount adaptor for secure attachment of K6/K6P powering modules to the flashmount of video cameras. Thread: 1/4”. Colour: black.
	Microphone head for K6/K6P (lobar, long gun)	ME 67	03285
	The ME 67 is a long gun microphone head designed for use with the K6 and K6P powering modules. A highly directional microphone, it can be used where the microphone must be placed at a distance from the sound source. Matt black, anodised, scratch-resistant finish.
	Microphone head for K6/K6P (super-cardioid/lobar)	ME 66	03284
	The ME 66 is a short gun microphone head designed for use with the K6 and K6P powering modules. It is especially suitable for reporting, film and broadcast location applications and for picking up quiet signals in noisy or acoustically live environments as it discriminates against sound not emanating from the main pick-up direction. Matt black, anodised, scratch-resistant finish.
	Microphone head for K6/K6P (super-cardioid)	ME 65	03283
	The ME 65 is a super-cardioid microphone head designed for use with the K6 and K6P powering modules. It is especially suited to vocal and speech applications. Matt black, anodised, scratch-resistant finish.
	Microphone head for K6/K6P (cardioid)	ME 64	03282
	The ME 64 is a cardioid microphone head designed for use with the K6 and K6P powering modules. It has a very wide range of applications including reporting, interviews, dubbing, live sound reinforcement and recording applications. Matt black, anodised, scratch-resistant finish.
	Microphone head for K6/K6P (omni-directional)	ME 62	03281
	The ME 62 is an omni-directional microphone head suitable for K6 and K6P powering modules. It can be used for reporting, discussions and interviews. The ME 62 is particularly suitable for good reproduction of ‘room’ ambience and ‘spaced omni’ stereo recording. Matt black, anodised, scratch-resistant finish.

Variant
	Product	Article No.