Professional Audio

General Description
The A 5000-CP passive antenna provides an optimum solution for both transmitting and receiving RF signals throughout the UHF spectrum. Installations have demonstrated that the circular polarization of this antenna minimizes variations in signal strength and almost eliminates multipath problems, a primary cause dropouts. The gain of this antenna over the entire UHF band is superior to common `off the shelf´ antennas.

The wideband design (450-960MHz) of the A 5000-CP allows it to accommodate antenna distribution systems for either wireless monitors or wireless microphones across multiple frequency ranges, offering maximum flexibility when designing complex RF systems.

Features

• High Gain
• Minimized Multipath
• Broadband

Delivery Includes

• A 5000-CP
• Adapter BNC to N
• User Manual

Technical Data

• Antenna: circular polarized helical, Half power beam width: + / - 40°---
• Antenna gain: 8 dBi
• Bandwidth: (- 3 dB) 450 - 960 MHz
• Connector: N (female)
• Weight: 3.1 Ibs. (1.41 kg)
• Dimensions: 356 x 356 x 140 mm

AB 1036     
AB 2 -A     
AB 2 -B   
AB 2 -C   
AB 2 -D 
AB 2 -E  
AB 3700

A 1031-U

Passive omni-directional antenna. Transmitting and
receiving antenna for frequencies between 450and 960 MHz.

GZP 10

Mounting plate
for antenna with 3/8" thread. Antenna
can be attached directly or via GZG 1029.

Swivel joint
for attachment to GZP 10 mounting plate. The swivel joint permits the exact positioning of antenna with 3/8" thread.

Active directional antenna.

• Frequency range: 450-960 MHz
• Bandwidth: 36 MHz
• Apex angle: approx. 100°
• Front-to-back ratio: ≥ 14 dB
• Gain: typ. 10 dB

Passive directional antenna.
Transmitting and receiving
antenna.

• Frequency range: 450-960 MHz
• Apex angle: approx. 100°
• Front-to-back ratio: ≥ 14 dB

Ground plane receiving antenna.
For frequency tuning, the antenna rods can be cut to
length.

• Design principle             passive ground plain
                                      antenna
• Function                        receiving antenna
• Frequency Range           140-960 MHz
• Bandwidth                     approx. fm ± 10 %
• Frequency adjustment    antenna rods can be cut 
                                      to length
• Impedance                    50 Ω
• RF connection                N-type connector, male
• Mounting connection       3/8" thread
• Length                           frequency-dependent
• Weight                          approx. 250 g

Ground plane receiving antenna.
Frequency tuning by adjusting
the length of the antenna rods.

Technical Data GZA 1036-TV

• Design principle            passive ground plain
                                     antenna
• Function                       receiving antenna
• Frequency Range          470-800 MHz
• Bandwidth                    approx. fm ± 10 %
• Frequency adjustment   telescopic
• Impedance                   50 Ω
• RF connection               N-type connector, male
• Mounting connection      3/8" thread
• Length                         270.5 x 254 mm
• Weight                         approx. 340 g

Antenna booster
for compensating for cable/splitter losses. N-type connectors. Attachment via 3/8" thread. Power supply via antenna cable or externally
via special socket.

• Frequency range 165-230 MHz / 470-960 MHz
• Bandwidth 6-8 MHz MHz / 8?24 MHz
• Amplification 10 dB
• Power supply 11-24 V, 70 mA at 24 V
  
  
   

Passive antenna splitter
2 x 1 : 2 (ASP 212) or passive antenna splitter 1 x 1 : 3 (ASP 113)
and passive antenna splitter 1 x 1 : 4 (ASP 114).
DC-coupled for use with antenna boosters. Special version with powering also available for using A 12
antennas with EM 3031/32 receivers.

• Frequency range 30-950 MHz
• Max. current 0.3 A DC
• Attenuation approx.
  • 4 dB (ASP 212)
  • approx. 6 dB (ASP 113)
  • approx. 8 dB (ASP 114)
• RF connector BNC socket